#Usb to ethernet mac not working how to#
#Usb to ethernet mac not working install#
#Usb to ethernet mac not working drivers#
#Usb to ethernet mac not working pro#

If there are firmware and OS X software updates available, install them onto the Mac.

#Usb to ethernet mac not working drivers#

If some USB devices work on the Mac, but another USB device does not work, consider that the device may be incompatible with that particular Mac, the USB device may be failing or have failed, or, in some situations, the USB device may need specific hardware drivers from the manufacturer in order to work properly (typically the case with special use devices, high-end scanners, etc).

If liquid has splashed on the Mac or the MacBook has contacted water, you will need to take immediate steps to power down and dry out the Mac for a chance to prevent permanent damage – liquid contact can destroy a Mac rather quickly, or damage certain hardware functionality, like USB.

If a single USB port has failed but other USB ports are continuing to work on the Mac, even after an SMC reset, there may be an issue with that specific hardware USB port – you can either avoid using that USB port and instead use a USB hub for one of the other functioning ports, or you can have Apple run a hardware diagnostics test on the machine to determine if there is any hardware failure.

Other Considerations for USB Not Working on a Mac If, after an SMC reset, and after an NVRAM reset, none of the USB ports are working, and no USB device is working, something else is likely up with the Mac.

When the Mac boots back up again, USB should be working as usual. The Mac should make a chime sound again, then let it boot as usual.Restart the Mac, and immediately hold down Command + OPTION / ALT + P + R keys together – keep holding the keys down until you hear a sound and see the screen flash, it may take a few seconds.Here is how you can perform the NVRAM reset on a Mac to see if this resolves the USB failure:

Sometimes resetting the NVRAM / PRAM on a Mac can help resolve the USB port failure as well, since NVRAM holds various data about keyboards, mouse, trackpad, and other USB components. Another Fix for USB Not Working: the NVRAM Reset The USB ports on the MacBook should now work just fine, which you can confirm by connecting the USB device as usual and checking to be sure that it works – if it’s still not working, try another USB port, and try another USB device.

#Usb to ethernet mac not working pro#

Boot the MacBook Pro / Air by hitting the power button as is typical.Hold down Shift+Control+Option+Power concurrently for a few seconds, when the light on the power adapter blinks or changes colors you’ll know SMC reset is complete.Shut down the Mac and connect the power cable.For those with a MacBook, MacBook Pro, and MacBook Air, all you need to do is this:

#Usb to ethernet mac not working how to#

You can learn how to reset the SMC on all Macs here in our detailed tutorial. So, you’re confident a USB port is the problem and not the device itself? The first thing you should do is reset the Mac SMC, a simple process which is slightly different depending on the Mac hardware. The Solution to No-Cause Random USB Failure on a Mac: Resetting SMC And yes, this can apply to any and all Macs, whether a MacBook Pro, MacBook Air, MacBook, iMac, Mac Mini, or Mac Pro. If multiple USB devices are not working on a particular port, or all ports, then it’s obviously less likely to be a device issue, and more likely to be related to the Mac itself. The easiest way to determine if the USB device itself is the problem versus the Mac USB port, is to try and use at least two different USB devices and switch their ports. This is particularly true with cheap low quality USB devices and cables. First and foremost, keep in mind that sometimes a USB device itself can fail, which may have nothing to do with the Mac itself.